Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 6

Passo 6
The printer has an automatic feature to clean the print head. Usually, there is a lot of ink (Probably melt with dust) in the area where the print head is cleaned Remove the 5 torx screw as shown in the picture Assuming the print head is now removed (Not shown on the picture), now gently tip the plastic plate and remove it
Cleaning the print head park slot
  • The printer has an automatic feature to clean the print head. Usually, there is a lot of ink (Probably melt with dust) in the area where the print head is cleaned

  • Remove the 5 torx screw as shown in the picture

  • Assuming the print head is now removed (Not shown on the picture), now gently tip the plastic plate and remove it

  • If you didn't put gloves yet, it is time to do it !

  • Now, push the carriage that holds the print head cleaning system (Red arrows)

  • The carriage that holds the print head cleaning system is now clean (Last picture)

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.