Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 5

Passo 5
Remove the springs that maintain the print head. Remove the print head by pulling on the ribbons. In case you want to replace the print head, the spare part reference is: CN688A
Removing the print head
  • Remove the springs that maintain the print head.

  • Remove the print head by pulling on the ribbons.

  • In case you want to replace the print head, the spare part reference is: CN688A

  • When inserting the print head after cleaning or replacing, make sure the horizontal plastic ribbon is between the plastic guides, as shown in the last picture.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.