Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 3

Passo 3
Unscrew the 7 torx screws. Do not forget the one under the printer label (You have to remove the printer label.  Lower right corner). Push the clips at the rear of the LCD panel and pull the LCD panel outwards at the same time Then, pull the ribbon connected to the LCD panel to disconnect the LCD panel from the printer.
Removing the printer hood
  • Unscrew the 7 torx screws. Do not forget the one under the printer label (You have to remove the printer label. Lower right corner).

  • Push the clips at the rear of the LCD panel and pull the LCD panel outwards at the same time

  • Then, pull the ribbon connected to the LCD panel to disconnect the LCD panel from the printer.

  • Remove the 2 remaining torx screws hidden by the LCD panel

  • See where are clips (Blue arrows)

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.