Rebuilding the ASF Assy

Torna alla Guida

Inglese

Italiano

Passo precedente Passo successivo

Traduzione in corso passo 9

Passo 9

Rebuilding the ASF Assy, Left side disconnects: passo 0, immagine 1 di 3

Rebuilding the ASF Assy, Left side disconnects: passo 0, immagine 2 di 3

Rebuilding the ASF Assy, Left side disconnects: passo 0, immagine 3 di 3

Left side disconnects

Disconnect the FFC (flat flexible cable) (which links the main board to the relay board) at CN1
Disconnect the Paper Edge sensor at CN2
Disconnect the APG (automatic paper guide?) sensors at CN4 and CN5.
Disconnect the FFC which links the Paper Feed Encoder to the relay board at CN6. The Paper Feed Encoder's FFC is also tacked to the Sheet Feeder by double sided tape. Carefully separate the cable from the Sheet Feeder's frame.
Deroute the red & black APG motor wires from the ASF (automatic sheet feeder) housing.
Deroute the Flat Flexible Cables from the groove in the Automatic Sheet Feeder housing.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.