Aggiusta le tue cose Community Store

Remplacement de la partie inférieure du boîtier du Toshiba Satellite C55D-B5206

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Torna alla Guida
Inglese
Francese
Passo precedente Passo successivo

Traduzione in corso passo 2

Passo 2
Toshiba Satellite C55D-B5206 Back Casing Replacement: passo 0, immagine 1 di 1

  • Insert a spudger at the center and into the crevice between the bottom casing and the keyboard and pry upwards.

  • Gently slide the spudger along the entire perimeter of the device and pry the casing loose to unhook 6 clips.

  • These images show a metal spudger, which has the potential to damage the device. Use a plastic opening tool or standard spudger instead.

  • Do not be alarmed if you feel a gentle tug or hear a click as you slide your spudger. These sounds are the clips detaching from the casing.

En commençant par le centre, insérez un spudger dans l’interstice entre la partie inférieure du boîtier et le clavier puis faites levier vers le haut.

Faites glisser délicatement le spudger le long du périmètre de l’appareil et faites levier tout autour du boîtier pour détacher les six clips.

Ces images montrent l’utilisation d’un spudger métal, cela constitue un risque d’endommager l’appareil. Utilisez un outil d’ouverture en plastique ou un spudger standard la place.

Ne vous inquiétez pas si vous entendez des craquements ou un clic lorsque vous faites glisser le spudger. Ces son sont produits lorsque les clips se détachent du boîtier.

-[* black] Starting at the center, insert a spudger into the crevice between the bottom casing and the keyboard and pry upwards.
-[* black] Gently slide the spudger along the entire perimeter of the device and pry the casing loose to unhook six clips.
+[* black] Insert a spudger at the center and into the crevice between the bottom casing and the keyboard and pry upwards.
+[* black] Gently slide the spudger along the entire perimeter of the device and pry the casing loose to unhook 6 clips.
[* icon_caution] These images show a metal spudger, which has the potential to damage the device. Use a plastic opening tool or standard spudger instead.
[* icon_note] Do not be alarmed if you feel a gentle tug or hear a click as you slide your spudger. These sounds are the clips detaching from the casing.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.