Disassembling Hyperion EOS0610i DUOII Chassis

Torna alla Guida

Inglese

Italiano

Passo precedente Passo successivo

Traduzione in corso passo 8

Passo 8

Disassembling Hyperion EOS0610i DUOII Chassis, Desolder the Charge Ports: passo 0, immagine 1 di 2

Disassembling Hyperion EOS0610i DUOII Chassis, Desolder the Charge Ports: passo 0, immagine 2 di 2

Desolder the Charge Ports

Desolder the two wires connected to the female banana plug ports for both channel 1 and 2 (left and ride sides of the charger).
Too high temperature setting will cause the plastic banana plug port covers to melt, use only as much heat as needed to flow the solder.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.