Nota: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto su tutte 5le guide che includono questo passo.
Traduzione in corso passo 3
Passo 3
-
With the Phillips #02 screwdriver, remove the six 6 mm length x 6 mm head screws from the back plate.
-
With the Phillips #02 screwdriver, remove the ten 6 mm length x 8 mm head screws from the back plate.
I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.