Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Cinese

Traduzione in corso passo 1

Passo 1
Before you begin, discharge the Surface Pro's battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally damaged during the repair. The display is strongly glued to the frame of the device.
  • Before you begin, discharge the Surface Pro's battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally damaged during the repair.

  • The display is strongly glued to the frame of the device.

  • To remove the display, first soften the adhesive by applying heat. You can use a heat pad, heat gun, or iOpener. In a pinch, a hair dryer can also work.

  • Be careful when using a heat gun, as too much heat can permanently damage the display and/or battery.

  • Steadily and evenly heat the perimeter of the display until it's too hot to touch, and try to maintain that temperature for several minutes.

将iOpeners 放在微波炉中加热30秒

将两个热的iOpener放在带有胶水屏幕的边缘。

[* icon_caution] Before you begin, discharge the Surface Pro's battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally damaged during the repair.
[* icon_note] The display is strongly glued to the frame of the device.
[*
black] Heat up oneTo remove the display, first soften the adhesive by applying heat. You can use a heat pad, heat gun, or multiple iOpeners iniOpener. In a pinch, a hair dryer can also work.
[* icon_caution] Be careful when using a heat gun, as too much heat can permanently damage
the microwave for 30 secondsdisplay and/or battery.
[* black] PlaceSteadily and evenly heat the hot iOpener(s) on the edgesperimeter of the devicedisplay until it's too hot to soften the glue securing the screentouch, and try to maintain that temperature for several minutes.
[* icon_caution] Before you begin, discharge the Surface Pro's battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally damaged during the repair.
[* icon_note] The display is strongly glued to the frame of the device.
[*
black] Heat up oneTo remove the display, first soften the adhesive by applying heat. You can use a heat pad, heat gun, or multiple iOpeners iniOpener. In a pinch, a hair dryer can also work.
[* icon_caution] Be careful when using a heat gun, as too much heat can permanently damage
the microwave for 30 secondsdisplay and/or battery.
[* black] PlaceSteadily and evenly heat the hot iOpener(s) on the edgesperimeter of the devicedisplay until it's too hot to soften the glue securing the screentouch, and try to maintain that temperature for several minutes.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.