Salta al contenuto principale
Inglese
Spagnolo

Traduzione in corso passo 4

Passo 4
Like the Nexus 6, there are no visible screws on the rear cover. Unlike the Nexus 6, this is a unibody device, so there won't be any handy peel-off rear cover. The 6P's smooth enclosure is broken only by this small, suspicious plastic panel at the bottom. Let's pile a hot iOpener on it and see what's inside. With enough heat, the panel is easily pried and peeled off, exposing four screws.
  • Like the Nexus 6, there are no visible screws on the rear cover. Unlike the Nexus 6, this is a unibody device, so there won't be any handy peel-off rear cover.

  • The 6P's smooth enclosure is broken only by this small, suspicious plastic panel at the bottom. Let's pile a hot iOpener on it and see what's inside.

  • With enough heat, the panel is easily pried and peeled off, exposing four screws.

  • Including one covered with a tamper evident seal. If this is your first visit to iFixit, check out our Repair Manifesto to see what we think about things like that.

Como el Nexux 6, no hay tornillos visibles en la cubierta trasera. A diferencia del Nexus 6, este es un dispositivo unibody, así que no habrá ninguna útil cubierta trasera removible.

La caja lisa del 6P solo puede romperse por este pequeño y sospechoso panel plástico en la parte inferior. Utilicemos un iOpener caliente y veamos lo que hay dentro.

Con suficiente calor, el panel se puede levantar y desprender, exponiendo cuatro tornillos.

Incluso uno cubierto con un sello de garantía. Si es esta tu primera visita de iFixit, fíjate en nuestro Manifiesto de Reparación para ver lo que pensamos sobre estas cosas.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.