Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 5

Passo 5
If Step 4 was done correctly, the board should dislodge from the corner mold. Remove the rest of the board by pulling it up and out. Pull the small narrow end of the board horizontally towards the corner, freeing the board from the panel with the exception of the connector.
  • If Step 4 was done correctly, the board should dislodge from the corner mold.

  • Remove the rest of the board by pulling it up and out.

  • Pull the small narrow end of the board horizontally towards the corner, freeing the board from the panel with the exception of the connector.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.