Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Inglese
Italiano

Traduzione in corso passo 4

Passo 4
Lift the front part of shell up, assuring not to pull too hard due a spring that is connect to the shell and the inside of the camera. Carefully, using a small #00 Philips head screwdriver, remove the spring from the inside component of the camera.
  • Lift the front part of shell up, assuring not to pull too hard due a spring that is connect to the shell and the inside of the camera.

  • Carefully, using a small #00 Philips head screwdriver, remove the spring from the inside component of the camera.

  • At this point you should have the shell removed completely. Congratulations! Repeat the steps backwards to get the shell back on your camera unit.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.