Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Cinese

Traduzione in corso passo 15

Passo 15
Continue derouting the cellular antenna cable from the second and third logic board clips. Use the pointed tip of a spudger to gently pry the cellular antenna cable from the middle logic board clip. Don't try to remove it by pulling on the cable, as it will tear easily.
  • Continue derouting the cellular antenna cable from the second and third logic board clips.

  • Use the pointed tip of a spudger to gently pry the cellular antenna cable from the middle logic board clip.

  • Don't try to remove it by pulling on the cable, as it will tear easily.

  • In order for the cable to reach its socket on the logic board, you must route it above the logic board and underneath the audio control flex cable, as shown in the first photo.

继续上个步骤, 把天线排线从主板的第二与第三个夹子分离。

使用撬棒尖头那端, 轻轻的将天线排线与中间主板的夹子分离。

请不要将排线从中间的夹子分离, 这样会造成容易扯掉排线。

为了让排线可以顺利地与主板连结, 你必须将排线将排线置于主板上方, 并同时置于音量控制排线的下方, 如同第一张照片所示。

[* black] Continue derouting the cellular antenna cable from the second and third logic board clips.
[* black] Use the pointed tip of a spudger to gently pry the cellular antenna cable from the middle logic board clip.
- [* icon_caution] Do not pull the cable out of the center clip, as it will tear easily.
+ [* icon_caution] Don't try to remove it by pulling on the cable, as it will tear easily.
[* icon_reminder] In order for the cable to reach its socket on the logic board, you must route it above the logic board and underneath the audio control flex cable, as shown in the first photo.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.