Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Giapponese

Traduzione in corso passo 15

Passo 15
Continue derouting the cellular antenna cable from the second and third logic board clips. Use the pointed tip of a spudger to gently pry the cellular antenna cable from the middle logic board clip. Don't try to remove it by pulling on the cable, as it will tear easily.
  • Continue derouting the cellular antenna cable from the second and third logic board clips.

  • Use the pointed tip of a spudger to gently pry the cellular antenna cable from the middle logic board clip.

  • Don't try to remove it by pulling on the cable, as it will tear easily.

  • In order for the cable to reach its socket on the logic board, you must route it above the logic board and underneath the audio control flex cable, as shown in the first photo.

続いて、2番目と3番目のロジックボードクリップからセルラーアンテナケーブルを解いて外します。

スパッジャーの先端を使って、ロジックボードクリップ中央からセルラーアンテナケーブルを丁寧に外します。

簡単に裂けてしまうため、ケーブルを引っ張って外そうとしないでください。

1番目の画像の通り、ロジックボードのソケットにケーブルが届くためには、ロジックボード上とオーディオコントロールフレックスケーブルの下にケーブルを通します。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.