Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Giapponese

Traduzione in corso passo 18

Passo 18
Tip the logic board up to a vertical position to expose the single antenna connector on the underside, near the top edge of the board. Do not attempt to fully remove the logic board yet, as the Wi-Fi/Bluetooth antenna is still connected to the underside of the board. Do not attempt to fully remove the logic board yet, as the Wi-Fi/Bluetooth antenna is still connected to the underside of the board.
  • Tip the logic board up to a vertical position to expose the single antenna connector on the underside, near the top edge of the board.

  • Do not attempt to fully remove the logic board yet, as the Wi-Fi/Bluetooth antenna is still connected to the underside of the board.

ボードの上部端あたりの下側にシングルのアンテナコネクターが確認できるように、ロジックボードを垂直に開きます。

まだロジックボードを完全に取り外さないでください。Wi-Fi/Bluetoothアンテナは、ボードの下でまだ繋がっています。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.