Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Tedesco

Traduzione in corso passo 19

Passo 19
Gently lay the logic board upside-down, with the top portion resting against the rear case of the iPhone. Use the flat end of the spudger to disconnect the Wi-Fi/Bluetooth antenna cable from its socket on the back of the logic board.
  • Gently lay the logic board upside-down, with the top portion resting against the rear case of the iPhone.

  • Use the flat end of the spudger to disconnect the Wi-Fi/Bluetooth antenna cable from its socket on the back of the logic board.

Lege das Logic Board vorsichtig mit der Oberseite nach unten, der obere Teil sollte dabei auf dem hinteren Gehäuse des iPhone aufliegen.

Verwende das flache Ende des Spudgers, um das Wlan/Bloetooth-Antennenkabel von der Buchse auf der Rückseite des Logic Boards zu trennen.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.