Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Tedesco

Traduzione in corso passo 1

Passo 1
Remove the four 6.0 mm T6 Torx hard drive retaining posts from the sides of the hard drive. Transfer the hard drive retaining posts to your new hard drive.
  • Remove the four 6.0 mm T6 Torx hard drive retaining posts from the sides of the hard drive.

  • Transfer the hard drive retaining posts to your new hard drive.

  • If desired, transfer the pull tab over to your new hard drive.

  • If you are installing a new hard drive, we have an OS X install guide to get you up and running.

  • If you upgraded your EFI Firmware ROM you can also perform an internet recovery.

Entferne die vier 6,0 mm T6 Torx Haltebolzen, die an den Seiten der Festplatte befestigt sind.

Übertrage die vier Bolzen auf die neue Festplatte.

Wenn gewünscht, übertrage die Ziehlasche auf die neue Festplatte.

Wenn du eine neue Festplatte installierst, folge dieser Anleitung, um OS X zu installieren.

Wenn du die EFI Firmware ROM aktualisiert hast kannst du außerdem eine Internet Wiederherstellung durchführen.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.