Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Giapponese

Traduzione in corso passo 1

Passo 1
Remove the following ten screws:
  • Remove the following ten screws:

  • Three 14.4 mm Phillips #00 screws

  • Three 3.5 mm Phillips #00 screws

  • Four 3.5 mm shouldered Phillips #00 screws

  • When replacing the small screws, align them perpendicular to the slight curvature of the case (they don't go straight down).

次のネジを10本外します。

14.4 mm #00プラスネジー3本

3.5 mm #00プラスネジー3本

3.5 mm #00 段付きプラスネジー4本

[* black] Remove the following ten screws:
[* red] Three 14.4 mm Phillips #00 screws
[* orange] Three 3.5 mm Phillips #00 screws
[* yellow] Four 3.5 mm shouldered Phillips #00 screws
[* icon_note] When replacing the small screws, align them perpendicular to the slight curvature of the case (they don't go straight down).

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.