Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 1

Passo 1
Remove the two 2.0 mm Phillips screws securing the power button bracket to the outer case. Slightly pull the power button cable bracket away from the outer case. If the power button happens to accidentally fall out, take note of the correct orientation. The metal loop should be facing downwards and the outward edges should be on top.
  • Remove the two 2.0 mm Phillips screws securing the power button bracket to the outer case.

  • Slightly pull the power button cable bracket away from the outer case.

  • If the power button happens to accidentally fall out, take note of the correct orientation. The metal loop should be facing downwards and the outward edges should be on top.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.