Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Giapponese

Traduzione in corso passo 4

Passo 4
The rubber gasket surrounding the home button is very thin and tears easily. Apply mild heat (with an iOpener, heat gun, or hair dryer) to soften the adhesive securing the home button gasket.
  • The rubber gasket surrounding the home button is very thin and tears easily.

  • Apply mild heat (with an iOpener, heat gun, or hair dryer) to soften the adhesive securing the home button gasket.

  • Using your fingertip, gently press up on the home button from the front side of the display assembly. Use firm, constant pressure to slowly separate the home button's rubber gasket from the front panel.

ホームボタン周辺のガスケットは大変薄く、簡単に裂けてしまいます。

中低温で温めて(iOpener、ヒートガン、ヘアドライヤー)、ホームボタンガスケットを固定している接着剤を柔らかくします。

指先を使って、ディスプレイアセンブリの正面側からホームボタンをゆっくりと押し上げます。強く、一定のプレッシャーでフロントパネルからホームボタンのゴム製ガスケットを慎重に剥がします。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.