Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Italiano

Traduzione in corso passo 4

Passo 4
The rubber gasket surrounding the home button is very thin and tears easily. Apply mild heat (with an iOpener, heat gun, or hair dryer) to soften the adhesive securing the home button gasket.
  • The rubber gasket surrounding the home button is very thin and tears easily.

  • Apply mild heat (with an iOpener, heat gun, or hair dryer) to soften the adhesive securing the home button gasket.

  • Using your fingertip, gently press up on the home button from the front side of the display assembly. Use firm, constant pressure to slowly separate the home button's rubber gasket from the front panel.

Usa la punta di un dito per premere delicatamente sul pulsante home dal lato anteriore del display per separare lentamente dal pannello anteriore la guarnizione in gomma del pulsante home.

La guarnizione è molto sottile e si rompe facilmente. Esercita una pressione costante e dai tempo alla parte di staccarsi.

[* icon_caution] The rubber gasket surrounding the home button is very thin and tears easily.
[* black] Apply mild heat (with an [product|IF145-198-2|iOpener], heat gun, or hair dryer) to soften the adhesive securing the home button gasket.
[*
black] Using your fingertip, gently press up on the home button from the front side of the display assemblyassembly. Use firm, constant pressure to slowly separate the home button's rubber gasket from the front panel.
[* icon_caution] The gasket is very thin and will tear easily. Apply steady pressure and give it time to separate.
[* icon_caution] The rubber gasket surrounding the home button is very thin and tears easily.
[* black] Apply mild heat (with an [product|IF145-198-2|iOpener], heat gun, or hair dryer) to soften the adhesive securing the home button gasket.
[*
black] Using your fingertip, gently press up on the home button from the front side of the display assemblyassembly. Use firm, constant pressure to slowly separate the home button's rubber gasket from the front panel.
[* icon_caution] The gasket is very thin and will tear easily. Apply steady pressure and give it time to separate.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.