Salta al contenuto principale
Inglese
Francese

Traduzione in corso passo 6

Passo 6
Unscrew the two screws attaching the flash to the main circuit board. The flash unit will detach away from the motherboard, now leaving just the connecting wires to remove next. Unscrew the two screws attaching the flash to the main circuit board. The flash unit will detach away from the motherboard, now leaving just the connecting wires to remove next.
  • Unscrew the two screws attaching the flash to the main circuit board. The flash unit will detach away from the motherboard, now leaving just the connecting wires to remove next.

Dévissez les deux vis fixant le flash à la carte de circuit imprimé principale. Le flash se détachera de la carte mère, ne laissant maintenant que les fils de connexion à retirer ensuite.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.