Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 6

Passo 6
Remove (3) 2.9mm screws from top circuit board. Note: Circuit board will resist trying to be pulled off so pull it off with care but still firmly. Lift up circuit board and remove (1) 2.9mm screw underneath.
  • Remove (3) 2.9mm screws from top circuit board.

  • Note: Circuit board will resist trying to be pulled off so pull it off with care but still firmly.

  • Lift up circuit board and remove (1) 2.9mm screw underneath.

  • Pull out copper plate with rubber insulator on it.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.