Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Giapponese

Traduzione in corso passo 2

Passo 2
Gently lift each side of the battery connector to pry the connector out of its socket on the logic board. Bend the connector back toward the battery, ensuring that the battery connector doesn't accidentally make contact with the logic board. Bend the connector back toward the battery, ensuring that the battery connector doesn't accidentally make contact with the logic board.
  • Gently lift each side of the battery connector to pry the connector out of its socket on the logic board.

  • Bend the connector back toward the battery, ensuring that the battery connector doesn't accidentally make contact with the logic board.

バッテリーコネクターの両側を静かに持ち上げて、コネクターをロジックボード上のソケットから引き出します。

バッテリーコネクターが誤ってロジックボードに接触しないように、コネクターをバッテリーの方に戻してください。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.