Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 8

Step 8
Remove the short medium screws Remove the ground screw Remove the heatsink screws and braces
Unscrew the board brace
  • Remove the short medium screws

  • Remove the ground screw

  • Remove the heatsink screws and braces

  • Lift the front to remove

  • Do this slowly. The heatsinks are not screwed down and you may damage the fins if you use too much force.

  • This is the second time I've taken this apart. That's why there is no thermal paste on the chips. They do put paste on there. Too much in my opinion.

  • When putting back together, all the screw places are marked. If the hole doesn't have a marker, don't put a screw in it.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.