Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 2

Passo 2
Use Phillips #000 Screwdriver to remove the case holding screws, remove the 4 screws that hold the back panel.
  • Use Phillips #000 Screwdriver to remove the case holding screws, remove the 4 screws that hold the back panel.

  • Apply gentle pressure when undoing the screws to preserve the condition of screw heads for future repairs or servicing.

  • It is important to manage all the extracted screws in a manner that will allow you to quickly place them where they belong during the reassembly process. You can take pictures of each step to memorize the screw placement, or purchase a magnetic pad and section the screws on it.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.