Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 19

Passo 19
Use the Phillips #000 Screwdriver to remove the cooling pad screws. Apply gentle pressure when undoing the screws to preserve the condition of screw heads for future repairs or servicing. Make sure that the screw pressure across the metal plate remain rather constant. Undo the screws by a couple of rotations each, removing them AT the same time.
removing cooling pads and fan part 2
  • Use the Phillips #000 Screwdriver to remove the cooling pad screws.

  • Apply gentle pressure when undoing the screws to preserve the condition of screw heads for future repairs or servicing.

  • Make sure that the screw pressure across the metal plate remain rather constant. Undo the screws by a couple of rotations each, removing them AT the same time.

  • Lift the cooling pads and the fan assembly.

  • Remove the old thermal compound, degrease the surface with rubbing alcohol.

  • Use a can of compressed air to clean the fan assembly.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.