Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 15

Passo 15
Carefully remove the ribbon cable connecting the two halves of the motherboard. Use Phillips #000 Screwdriver to remove the motherboard screws. Apply gentle pressure when undoing the screws to preserve the condition of screw heads for future repairs or servicing.
removing mainboard
  • Carefully remove the ribbon cable connecting the two halves of the motherboard.

  • Use Phillips #000 Screwdriver to remove the motherboard screws.

  • Apply gentle pressure when undoing the screws to preserve the condition of screw heads for future repairs or servicing.

  • Use a plastic prybar to remove the LCD connector. Be careful not to break the cable or its plastic holder.

  • Unplug the DC jack cable before removing the motherboard.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.