Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 1

Step 1
Start by removing the back case, battery, sim card, and sd card. Now remove the 10 screws using a #00 philips screwdriver. After the ten screws are removed, proceed by separating the middle housing from the back housing using a opening tool such as a guitar pick or another separating tool.
  • Start by removing the back case, battery, sim card, and sd card.

  • Now remove the 10 screws using a #00 philips screwdriver.

  • After the ten screws are removed, proceed by separating the middle housing from the back housing using a opening tool such as a guitar pick or another separating tool.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.