Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 11

Passo 11
Remove the last ribbon cable by using the flat end of the spudger to pry the cable from the board. When replacing the ribbon cables, keep in mind that these last four cables simply snap back onto the motherboard.
  • Remove the last ribbon cable by using the flat end of the spudger to pry the cable from the board.

  • When replacing the ribbon cables, keep in mind that these last four cables simply snap back onto the motherboard.

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.