Salta al contenuto principale
Inglese
Francese

Traduzione in corso passo 3

Passo 3
Undo the grey clip that holds the LCD ribbon in place by loosening one side of the clip with the plastic opening tool, then gently separate the other side of the clip from the holder. The copper end of the ribbon should slide out of the housing as you pull the LCD up and away from the motherboard. Using too much force may bend the copper ribbon.
  • Undo the grey clip that holds the LCD ribbon in place by loosening one side of the clip with the plastic opening tool, then gently separate the other side of the clip from the holder.

  • The copper end of the ribbon should slide out of the housing as you pull the LCD up and away from the motherboard.

  • Using too much force may bend the copper ribbon.

Dévissez le clip gris qui maintient le ruban LCD en place en desserrant un côté du clip avec l'outil d'ouverture en plastique, puis séparez délicatement l'autre côté du clip du support.

L'extrémité en cuivre du ruban devrait glisser hors du boîtier lorsque vous retirez l'écran LCD de la carte mère.

L'utilisation d'une trop grande force peut plier le ruban de cuivre.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.