Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Tedesco

Traduzione in corso passo 24

Passo 24
Continue lifting the display assembly from the front-facing camera side. Pull the display slightly away from the bottom edge to completely separate it from the rear case. Keep lifting until the display assembly is roughly perpendicular to the body of the iPad.
  • Continue lifting the display assembly from the front-facing camera side.

  • Pull the display slightly away from the bottom edge to completely separate it from the rear case.

  • Keep lifting until the display assembly is roughly perpendicular to the body of the iPad.

  • Do not attempt to remove the display yet—it is still attached to the rear case by three delicate ribbon cables.

Fahre fort die Displayeinheit von der Frontkamera-Seite aus anzuheben.

Ziehe sie leicht von der Unterkante weg um sie ganz vom rückwärtigen Gehäuse zu lösen.

Hebe weiter an, bis die Displayeinheit fast rechtwinklig zum Gehäuse des iPad steht.

Versuche noch nicht das Display ganz zu entfernen, es ist noch mit drei empfindlichen Flachbandkabeln mit dem hinteren Gehäuse verbunden.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.