Traduzione in corso passo 8
Passo 8
Removing Accessories
-
Starting at the top of the phone, remove the two Phillips screws holding the camera flash retaining plate.
-
1x 1.5mm Phillips Srew (RED)
-
1x 2.3mm Phillips Screw ( Green)
-
Use tweezers to carefully fold the flash flex cable upward.
-
NOTE: The metal box that the flash module rests in will usually stay adhered to the cable. Should they separate, set aside the metal housing for later installation.
I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.