Traduzione in corso passo 5
Passo 5
Removing the EMI shield
-
Remove the three Phillips screws securing the EMI shield to the logic board. ( The upper right screw is an aluminum screw which makes it non-magnetic. )
-
Two 1.2mm Phillips Screws
-
1x 1.6mm Phillips non-magnetic Phillips Screws
-
In order to remove the EMI shield, slightly lift it upward at an angle using tweezers, then slide the EMI shield toward the battery and remove it.
I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.