Salta al contenuto principale

MacBook Pro 13" Retina 显示屏 2015早期 触摸板更换

Inglese
Cinese

Informazioni Guida

= Fatto = Incompleto
    Does your Force Touch trackpad require a bit more force than it used to? Taptic engine acting up? Use this guide to replace the trackpad in your Early 2015 13" MacBook Pro.
    This procedure involves using adhesive remover to remove the battery. '''Do not reuse the battery after it has been removed, as doing so is a potential safety hazard.''' Replace it with a new battery.
    '''iFixit adhesive remover is highly flammable.''' Perform this procedure in a well-ventilated area. Do not smoke or work near an open flame during this procedure.
    '''To minimize risk of damage, turn on your MacBook and allow the battery to fully discharge before starting this procedure.''' A charged lithium-ion battery can create a dangerous and uncontrollable fire if accidentally punctured. If your battery is swollen, [[What to do with a swollen battery|take extra precautions|new_window=true]].
      To reassemble your device, follow these instructions in reverse order.
      ***To reassemble your device, follow the above steps in reverse order.***
      Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
      Repair didn’t go as planned? Check out our [link|https://www.ifixit.com/Answers/Device/MacBook%20Pro%2013%22%20Retina%20Display%20Early%202015|Answers community] for troubleshooting help.

      Passi guida

      Passo 1

      移除十颗将触摸板保护壳与顶壳固定的2.8mm T3螺丝。

      Passo 2

      移走触摸板外壳。

      Passo 3

      移走12颗将触摸板与顶壳固定的2.4mm T5螺丝。

      Passo 4

      将触摸板从顶壳中移走。

      I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.