Aggiusta le tue cose Community Store

MacBook Pro（13 英寸，配备 Retina 显示屏2015 年初期）电池更换

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Torna alla Guida
Inglese
Cinese
Passo precedente Passo successivo

Traduzione in corso passo 12

Passo 12
MacBook Pro 13" Retina Display Early 2015 Battery Replacement: passo 0, immagine 1 di 3 MacBook Pro 13" Retina Display Early 2015 Battery Replacement: passo 0, immagine 2 di 3 MacBook Pro 13" Retina Display Early 2015 Battery Replacement: passo 0, immagine 3 di 3

  • If using liquid adhesive remover, apply a few more drops under each of the final two, middle cells.

  • It may help to elevate one side of your MacBook Pro a few inches so that the adhesive remover flows in the correct direction, underneath the battery cells. You can use a sturdy book or foam block to prop up one side of your MacBook Pro while you work.

  • Allow 2-3 minutes for the adhesive remover to penetrate before you continue.

  • Gently folding the right-most battery cells out of the way, insert a plastic card under the right center cell.

  • Push the card in about half of its length to cut the adhesive holding the battery cell to the case.

  • Be sure to avoid the trackpad control board. Aim the card up toward the logic board, where the adhesive is.

  • Leave the card in place to keep the adhesive from re-sealing.

如果使用液体粘合剂去除剂，在每个最外侧的两个中间再加几滴去除剂。

将MacBook Pro的一边抬起几英寸，可以帮助粘合剂去除剂以正确的方向在电池下流动。 您可以使用坚固的书或泡沫块来垫高MacBook Pro的一侧。

在继续之前，让胶水去除剂渗透2-3分钟。

轻轻折叠最右边的电池，将塑料卡正确插入中央电池包下。

将卡片推入其长度的一半左右，来切割电池和外壳之间的粘合剂。

避免碰到触摸板，将卡对准粘合剂所在的地方-逻辑板。

将卡放在适当位置上，以防止粘合剂重新密封。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.