Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto sulla guida che include questo passo.

Inglese
Tedesco

Traduzione in corso passo 6

Passo 6
If you didn't perfectly align the adhesive with the panel, use an X-Acto knife to trim away the edges. This will only fix minor misalignments. If you have to trim off more than half the adhesive strip, you should remove the tape and start over. This will only fix minor misalignments. If you have to trim off more than half the adhesive strip, you should remove the tape and start over.
  • If you didn't perfectly align the adhesive with the panel, use an X-Acto knife to trim away the edges.

  • This will only fix minor misalignments. If you have to trim off more than half the adhesive strip, you should remove the tape and start over.

Wenn du den Klebstoff nicht perfekt auf der Platte ausgerichtet hast, schneide die Kanten mit einem X-Acto-Messer ab.

Dies wird nur geringfügige Fehlausrichtungen beheben. Wenn du mehr als die Hälfte des Klebestreifens abschneiden musst, solltest du das Klebeband entfernen und neu beginnen.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.