Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto sulla guida che include questo passo.

Inglese
Tedesco

Traduzione in corso passo 2

Passo 2
Lay the glass panel face-up and rotate it so that the lens holes are on your right. Grasp the adhesive from both sides and align the tape over the rear glass. Make sure to align the camera and heart rate sensor holes on the phone with the adhesive tape.
  • Lay the glass panel face-up and rotate it so that the lens holes are on your right.

  • Grasp the adhesive from both sides and align the tape over the rear glass.

  • Make sure to align the camera and heart rate sensor holes on the phone with the adhesive tape.

  • Lay the adhesive on top of the glass.

Lege die Glasscheibe mit der Vorderseite nach oben und drehe sie so, dass sich die Linsenöffnungen auf der rechten Seite befinden.

Fasse den Klebstoff von beiden Seiten und richte das Klebeband über der Glasscheibe aus.

Stelle sicher, dass die Öffnungen für die Kamera und die Herzfrequenzsensoren am Smartphone mit dem Klebeband ausgerichtet sind.

Lege die Klebefolie auf das Glas.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.