Salta al contenuto principale
Inglese
Francese

Traduzione in corso passo 6

Passo 6
The solder bead should look like a small dome or hemisphere. If it is flat or jagged, simply place the soldering iron back on the solder to re-melt it and then pull the soldering iron away. It may require a little more solder if this does not work.
  • The solder bead should look like a small dome or hemisphere. If it is flat or jagged, simply place the soldering iron back on the solder to re-melt it and then pull the soldering iron away. It may require a little more solder if this does not work.

La bille de soudure devrait avoir l'air d'un petit dôme ou d'une hémisphère. Si elle est plate ou irrégulière, posez le fer à souder à nouveau sur la soudure pour la refaire fondre, puis retirez le fer à souder. Ceci peut nécessiter un peu de soudure supplémentaire si ça ne fonctionne pas.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.