Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 5

Passo 5
Water supply from the boiler to the K-cup needle is via a water hose through a check valve. Remove the two small screws that hold the water line to the inlet Unhook the water line from the connector above the K-cup needle. it is a simple press fit.
  • Water supply from the boiler to the K-cup needle is via a water hose through a check valve.

  • Remove the two small screws that hold the water line to the inlet

  • Unhook the water line from the connector above the K-cup needle. it is a simple press fit.

  • Next remove the tie straps. (You don't have to do this step) Just remove the other end of hose from pump. You might have to use a flat head screwdriver to lift up on end of hose while pulling up

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.