Nota: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto su tutte le 8guide che includono questo passo.
Traduzione in corso passo 2
Passo 2

-
Remove the battery from the phone.
[* black] Remove the battery from the phone. |
[* icon_caution] Do not reuse the battery after it has been removed, as doing so is a potential safety hazard. Replace it with a new battery. |
[* icon_reminder] [* black] Remove any remaining adhesive from the phone, [* black] Secure the new battery with pre-cut adhesive or double-sided adhesive tape. In order to position it correctly, apply the new adhesive into the phone, not directly onto the battery. The adhesive should go around the perimeter of the battery compartment, but not in the rectangular cutout in the center (which is actually the back side of the display). [* black] Press the battery firmly into place for 5-10 seconds |
[* icon_reminder] [* black] Remove any remaining adhesive from the phone, [* black] Secure the new battery with pre-cut adhesive or double-sided adhesive tape. In order to position it correctly, apply the new adhesive into the phone, not directly onto the battery. The adhesive should go around the perimeter of the battery compartment, but not in the rectangular cutout in the center (which is actually the back side of the display). [* black] Press the battery firmly into place for 5-10 seconds |
I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.