Salta al contenuto principale

Fix Your Stuff

Right to Repair

Parts & Tools

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Tedesco

Traduzione in corso passo 6

Passo 6
Use the flat end of a spudger to disconnect the daughterboard ribbon cable connector from its socket on the underside of the motherboard. Use the flat end of a spudger to disconnect the daughterboard ribbon cable connector from its socket on the underside of the motherboard.
  • Use the flat end of a spudger to disconnect the daughterboard ribbon cable connector from its socket on the underside of the motherboard.

Löse den Flachbandkabelstecker des Daughterboards aus seiner Fassung auf der Unterseite des Motherboards.

[* black] DisconnectUse the flat end of a spudger to disconnect the daughterboard ribbon cable connector from its socket on the underside of the motherboard.
[* black] DisconnectUse the flat end of a spudger to disconnect the daughterboard ribbon cable connector from its socket on the underside of the motherboard.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.