Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Tedesco

Traduzione in corso passo 6

Passo 6
To install new rear glass: Use tweezers to peel away any remaining adhesive from the phone's chassis.
  • To install new rear glass:

  • Use tweezers to peel away any remaining adhesive from the phone's chassis.

  • Clean the adhesion areas with high concentration isopropyl alcohol (at least 90%) and a lint-free cloth. Swipe in one direction only, not back and forth. This will help prep the surface for the new adhesive.

  • Peel the adhesive backing off of the new rear glass, carefully line up one edge of the glass against the phone chassis, and firmly press the glass onto the phone.

  • If you're reinstalling the old rear glass, or using rear glass without adhesive pre-installed, follow this guide.

Ziehe alle verbliebenen Kleberreste mit einer Pinzette von der Glasscheibe und vom Rahmen des Smartphones ab.

Reinige dann die Klebeflächen mit hoch konzentriertem Isopropylalkohol (mindestens 90%) und einem fusselfreien Tuch. Wische nur in eine Richtung, nicht vor und zurück. Die Oberfläche wird so für den neuen Kleber vorbereitet.

Folge dieser Anleitung, um das Rückpanel wieder einzubauen.

[* icon_reminder] To install new rear glass:
[*
black] Use tweezers to peel away any remaining adhesive from both the rear glass and the phone's chassis.
[*

[*
black] Then, cleanClean the adhesion areas with high concentration isopropyl alcohol (at least 90%) and a lint-free cloth. Swipe in one direction only, not back and forth. This will help prep the surface for the new adhesive.
[* black] Peel the adhesive backing off of the new rear glass, carefully line up one edge of the glass against the phone chassis, and firmly press the glass onto the phone.

[* icon_reminder] Follow [guide|47490|this guide] to reinstallIf you're reinstalling the old rear glassglass, or using rear glass without adhesive pre-installed, follow [guide|47490|this guide|new_window=true].
[* icon_reminder] To install new rear glass:
[*
black] Use tweezers to peel away any remaining adhesive from both the rear glass and the phone's chassis.
[*

[*
black] Then, cleanClean the adhesion areas with high concentration isopropyl alcohol (at least 90%) and a lint-free cloth. Swipe in one direction only, not back and forth. This will help prep the surface for the new adhesive.
[* black] Peel the adhesive backing off of the new rear glass, carefully line up one edge of the glass against the phone chassis, and firmly press the glass onto the phone.

[* icon_reminder] Follow [guide|47490|this guide] to reinstallIf you're reinstalling the old rear glassglass, or using rear glass without adhesive pre-installed, follow [guide|47490|this guide|new_window=true].

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.