Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto sulla guida che include questo passo.

Inglese
Italiano

Traduzione in corso passo 6

Passo 6
The power supply can lifted out and rotated down and set on the workbench. Be very careful not to pull on the power supply as it will still be connected to the motherboard. Use ESD-safe tweezers to carefully disconnect the wi-fi antenna by pulling it straight up.
Disconnect WiFi Antenna
  • The power supply can lifted out and rotated down and set on the workbench.

  • Be very careful not to pull on the power supply as it will still be connected to the motherboard.

  • Use ESD-safe tweezers to carefully disconnect the wi-fi antenna by pulling it straight up.

  • Be be careful not to apply too much force on the WiFi connector as it can break off.

  • Do NOT use pliers as shown in this hastily taken photo.

  • After the WiFi cable is disconnected, de-route the cable from the two clips and under the optical drive cable.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.