Aggiusta le tue cose Community Store

De centrale ventilator van de BenQ MP512ST-projector vervangen

Passo precedente Passo successivo

Traduzione in corso passo 8

Torna alla Guida
Inglese
Olandese
Passo 8
Replacing BenQ MP512ST Projector Central Fan: passo 0, immagine 1 di 2 Replacing BenQ MP512ST Projector Central Fan: passo 0, immagine 2 di 2

  • Remove the single Phillips screw on the circuit board.

  • Gently pull up on the circuit board to remove it.

  • The circuit board still has a few connections to the other circuit board placed underneath it. Don't worry about these as they will disconnect as you lift up on the circuit board.

Verwijder de enkele kruiskopschroef op de printplaat.

Trek voorzichtig aan de printplaat om deze te verwijderen.

De printplaat heeft nog enkele aansluitingen naar de andere printplaat die eronder zit. Maak je hier geen zorgen over, ze worden losgekoppeld als je de printplaat optilt.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.