Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Tedesco

Traduzione in corso passo 2

Step 2
The rear panel is secured to the front case by eleven clips permanently attached to the rear panel. These clips lock onto small tabs machined into the front case.
  • The rear panel is secured to the front case by eleven clips permanently attached to the rear panel. These clips lock onto small tabs machined into the front case.

  • To free the tabs, they must be pushed down and away from the iPod's case. Note the location of all tabs on the rear panel. When using an iPod opening tool to free the rear panel, be sure to work the tool at the location of these clips.

Die Rückseite ist an die Vorderseite mit elf Klammern befestigt. Diese Klammern rasten in kleine Laschen an der Vorderseite ein.

Um die Klammern zu lösen, müssen sie heruntergedrückt und vom Gehäuse weggedrückt werden. Merke dir die Position jedes Tabs an der Rückseite. Wenn das iPod Opening Tool benutzt wird, um die Rückseite zu lösen, stelle sicher diese Stellen zu nutzen.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.