Nota: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto su tutte le 3guide che includono questo passo.
Traduzione in corso passo 6
Passo 6
-
You can now fully remove the wheel from the hub. Set it aside until you put the wheel back together.
-
Remove the innermost three 37.5mm silver screws with a Phillips #1 screwdriver.
-
Remove the wheel hub and push the connector through the center of the hub.
I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.