Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 12

Passo 12
Before the resin sets - make sure your fan can spin freely Prep the wire ends by applying solder to them Next, feed some tiny shrink wrap over the cable, THEN solder them together (somehow I always end up having to desolder stuff ...:)
Connecting & Testing
  • Before the resin sets - make sure your fan can spin freely

  • Prep the wire ends by applying solder to them

  • Next, feed some tiny shrink wrap over the cable, THEN solder them together (somehow I always end up having to desolder stuff ...:)

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.