Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Inglese
Italiano

Traduzione in corso passo 1

Passo 1
Remove the four 12.2mm screws using the Phillips screw driver. The motors and gear box should now slide out. As you take it out, the metal spring band as well as the track for the wheel gear will also slide off. During reinstallation, make sure when doing this step to align the stop on the wheel gear with the track as shown in the second and third pictures.
  • Remove the four 12.2mm screws using the Phillips screw driver.

  • The motors and gear box should now slide out. As you take it out, the metal spring band as well as the track for the wheel gear will also slide off.

  • During reinstallation, make sure when doing this step to align the stop on the wheel gear with the track as shown in the second and third pictures.

  • When you have separated these parts, you can set them aside until reassembly.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.