Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Inglese
Francese

Traduzione in corso passo 2

Passo 2
Flip over the device. Now remove fourteen 15.8 mm screws from the underside of the pedal assembly with a Phillips #1 screwdriver. There are two of these screws under the carpet grip, make sure you don't miss those!
  • Flip over the device. Now remove fourteen 15.8 mm screws from the underside of the pedal assembly with a Phillips #1 screwdriver.

  • There are two of these screws under the carpet grip, make sure you don't miss those!

  • When finished, flip over the device again so that it's in its original position.

Retournez l'appareil. Retirez maintenant quatorze vis de 15,8 mm du dessous de la pédale avec un tournevis cruciforme # 1.

Il y a deux de ces vis sous la poignée du tapis, assurez-vous de ne pas les manquer!

Une fois terminé, retournez à nouveau l'appareil afin qu'il se trouve dans sa position d'origine.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.