Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Inglese
Giapponese

Traduzione in corso passo 3

Passo 3
Be sure the face of the LCD is perfectly clean before proceeding.
  • Be sure the face of the LCD is perfectly clean before proceeding.

  • Stick the tape down to the frame of the front panel assembly along the long edge of the LCD.

  • Carefully lower the LCD down into its recess in the new front panel frame, being sure it is properly positioned.

次の作業に移る前に、LCDの表面にテープ等の汚れが残っていないか確認してください。

LCD長辺側の端に沿ってフロントパネルアセンブリのフレームにテープを貼り付けます。

LCDを慎重に下ろして、新しいフロントパネルフレームの凹みに装着し、正しい位置に配置されていることを確認します。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.